I do have an option for you but they do not make the Curt Multipurpose Ball Mount part # D210 with a 4" drop. Instead, I recommend taking a look at the Shank for Gen-Y Adjustable Ball Mount part # 325-GH-303 which can be used as a dual hitch receiver and will allow for you to obtain either a 5" rise/drop, 2-1/2" rise/drop, or 0" rise/drop. We do not have any dual hitch receivers that can be used for a tow dolly and will allow for a 4" drop. view full answer...
The feet on your motorhome's landing gear should not be bent at all, and for a SnapPad like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4 you're looking to fit, it's going to need to be replaced.
For instance, if you had a Lippert Landing Gear and needed a replacement 9" foot to work with the SnapPads mentioned above, you'd need the Lippert 5th Wheel RV Landing Gear Foot Pad # LC314667. view full answer...
The Advent Air AC unit for Dometic setups part # ACDOM135 would be a great option to replace your Dometic unit. It will use the same mounting, ducts, and wiring as what you have now and the thermostat will also work. view full answer...
If your tow dolly has electric brakes and you want them to actuate (which is highly recommended), you'll need to install a brake controller.
Although the Curt # C51180 Echo is a great piece of equipment, due to the interior partition walls of your Georgetown, the Bluetooth signal wouldn't reach the driver's seat from the unit plugged into the 7-way, so a wireless brake controller wouldn't be a good choice.
Your best option would be to use a standard brake controller. From what I read,... view full answer...
I was able to find that your 2007 Forest River Georgetown XL 370TS is built on the Ford F-53 Chassis so you will be able to use the SumoSprings Rebel Custom Helper Springs # SSF-171-40-2 which is designed to help support the front end of your Motorhome.
I highly recommend the SumoSprings # SSF-171-40-2 due to not only helping level out your motorhome, they also help to prevent sway when driving. The bolt-on installation makes for an easy install and they are maintenance free unlike air... view full answer...
We do not sell the crimp tool needed to install the hydraulic fittings # LC249363 or part # LC138416. Best place to find a local place that could point you in the right direction would be a business that does fork lift repairs as installing these is a very common task for them. view full answer...
The Global Link # 295-000015 latch is meant for a baggage door latch. It will replace a baggage door latch from Global Link, Fastec (FIC), Bauer, or Lippert Components that measures 4-1/2 x 5. Unfortunately, there isn't an existing database to tell us specifically what latch your Motorhome uses.
If you're looking for an entry door latch, you'll need to contact Forest River for that, as all the entry door latches we offer are meant for towed RVs which aren't meant to be occupied while... view full answer...
For the 1999-2011 F-53 chassis motorhomes there is a brake controller installation port behind the instrument cluster. We have heard it is fairly difficult to locate, but if you keep digging you should find a gray connector that would work.
The correct harness needed to install the P3 brake controller # 90885 would be the part # 3035-P. view full answer...
Yes, you can use the Tekonsha Plug-In Adapter # 3035-P to install the Tekonsha Primus IQ # TK90160 on your 2017 Forest River Georgetown. view full answer...
Since the bolts that come with the Roadmaster Polyurethane Bushing Kit # RM-4139-125 are designed to attach to threaded parts of the vehicle suspension nuts are not included or needed. Check out the install video I attached for more info on how it installs. view full answer...
I was able to confirm with my contact over at Lippert that the hex head bolt you're looking for is available with part # LC77UD. This is the bolt that goes through the main gear of your Lippert Coach Steps. view full answer...
The Air Lift kit that fits your 2008 Georgetown SE350 is the part # AL57410. This will not raise the suspension of the motorhome at all either. view full answer...
For the headache and cost it's probably best for you to go with a new microwave. I looked up the dimensions of your Magic Chef Model MCO153S and the closest matching option we have is the Greystone Over the Range RV Microwave # 324-000135 since yours is overall 29.9 inches wide. view full answer...
For the replacement gear you will use the Replacement Entry Step Gear for Lippert Kwikee 25 and 26 Series Triple Steps # LC369354. I believe the shear pin you are referring to is a part of the gear itself. The motor is # LC369506 which comes with the smaller gear.
If you want to replace the entire assembly you can use the Lippert Components Kwikee Step Replacement Kit # LC379804. view full answer...
Since we know that your 2006 Forest River Georgetown DS350 is built on a Ford F-53 chassis we do know that the Timbren kit part # TFRF53A is a confirmed fit. view full answer...
If you are looking for a replacement step setup the number on the step that I can see corresponds to a Lippert Kwikee 32 Series Electric Step # LC3722617 which is a powered double step for RVs like your 2007 Georgetown. view full answer...
I really don't have a good answer on why the MORryde Safe-T-Rail Telescoping RV Hand Rail # MR54BR can't be used on a class A motorhome.
Realistically, as long as the surface that this is being installed onto is completely flat, free of obstructions, and is made of fiberglass you're fine. If the wall is curved or has corrugated steel walls I'd steer clear and avoid installing this.
I do also recommend checking MORryde's website, and read the "Qualifier" PDF to be sure. It can be found... view full answer...
As a rule of thumb for motorhome suspension upgrades, it's always a good idea to begin with anti-sway bars on the rear such as the one you mentioned # RM-1139-146 to improve the steering and ride quality, and then the same for the front.
Have you already installed an anti-sway bar on the front axle? If not, that is the product I'd recommend next, # RM-1139-148 From there, I'd recommend the steering stabilizer you mention # RM-RBK22-RSSA and then some SumoSprings Helper springs for the... view full answer...
The Furrion Chill Replacement RV Air Conditioner for Dometic Brisk Setup # FR42PV was designed to be a direct replacement for a Dometic rooftop unit so you'll be able to just swap out the units with this plug-and-play design. Since it uses the same connections as your Dometic unit you'll be able to retain the use of your current air distribution box and thermostat. view full answer...
For your 2011 Forest River Georgetown Class A Motorhome with V10, you have a Ford F53 chassis and the Triton engine so I have exactly what you need. There are a few products that will greatly help with your handling and sway control, so I'll give them in the order that will give you the most help, but both can be used together for the best ride.
I recommend first installing the Roadmaster Rear Anti-Sway Bar for Motorhomes # RM-1139-146. This product is rated for your GVWR and fits coaches... view full answer...